Beam Model 90, 90S, 191, 193, 197C, 197D, 197S, 199C, 199D, 199E, 199F, 199G, 199J, 275A, 299A, 371, 371C, 371D, 2100, 2150, 2200, PE371 and SR-88 Ametek Vacuum Motor, 120 volt

$184.88

Warranty: 30 Days

Mfr. Model #: 90 SKU: MTR751 Categories: ,
Shipping Features

Description

This is an Ametek Vacuum Motor for your Beam models 90, 90S, 190, 193, 193D, 197C, 197S, 199C, 199D, 199E, 199F, 199G, 199J, 275A, 299A, 371, 371C, 371D, 2100, 2150, 2200, PE371 and SR-88, 120 volt.

This motor has sealed bearings in it so dust and dirt will not get into the system. This allows for a longer motor life. The factory motor does not have this sealed bearing.

SPECIAL NOTE:  THIS MOTOR MEASURES 5.7 INCHES IN DIAMETER.  IF YOUR MOTOR MEASURES 7.2 INCHES IN DIAMETER YOU NEED TO PURCHASE MOTOR PART MTR381

DON’T RISK PREMATURE FAILURE FOR YOUR NEW MOTOR!

We HIGHLY recommend the maximum protection of your motor by using our exclusive Filtered Motor Gasket, part MTR1500. Our Filtered Motor Gasket is the only one of its kind and only available from Central Vacuum Factory! It is specially designed by our engineers to provide your motor with years of trouble free service by filtering out dust and dirt BEFORE they reach your motor and damaging it! The filtered motor gasket fits flush and is as easy to apply as a regular gasket and will not add any height to your motor during mounting!

For a standard motor gasket purchase part MTR512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part MTR553.

Uses motor brush part MTR515.

Installation note:

Over-tightening of the mounting screws may cause the fan casing to push into the fan blades and may damage the fans.  This situation is not covered under the Motor Warranty Program and will not be approved if submitted.  If motor is turned in under warranty and is found to have the type of damage explained above, the warranty will be denied.  When mounting your new motor, in most cases a touch BEYOND “finger tight” is all that is required to mount and seat the motor sufficiently.

Reviews

There are no reviews yet.

Be the first to review “Beam Model 90, 90S, 191, 193, 197C, 197D, 197S, 199C, 199D, 199E, 199F, 199G, 199J, 275A, 299A, 371, 371C, 371D, 2100, 2150, 2200, PE371 and SR-88 Ametek Vacuum Motor, 120 volt”

You may also like…

Filtered Motor Gasket for a 4.3″, 4.8″, 5.1″, 5.7″, 7.2″, 7.5″ and 8.4″ vacuum motor

SKU: MTR1500
$11.99
Add to cart

Motor Gasket for a 4.3″, 4.8″, 5.1″ and 5.7″ vacuum motor

SKU: MTR512
$7.99
Add to cart

Motor brushes for Lamb Ametek vacuum motors #116765, 116765-00, 116765-13, 116765-29, 116845, 117100, 117160, 117446-29, 117760, 117939, 117939-00, 117939-13, 119260-07, 119292, 119292-00, 119697, 119797-19

SKU: MTR515
$21.84 available on subscription
Add to cart

Filter for 5.7 inch motors

SKU: MTR553
$7.99
Add to cart