New Lamb Ametek Flo-Tek Generation II 119892-04 1 stage 9.0″ Blower Motor, 120 volt.
This motor is equipped with interrupter style of carbon brushes that have an “auto-stop” device that shuts the motor down before damage can be done to the commutator.
For Replacement Interrupter style carbon brushes, please see our part #MTR2227.
If you would like to use our standard motor brushes, see our part #MTR507
- Motor Type: Bypass
- Discharge: Tangential
- Bearings: Double Ball Bearing
- Sealed Vacuum: 71.2 inches
- Maximum Air Watts: 833
- Maximum Air Flow: 244.5 CFM
- Maximum Amps: 15.5
- Motor Speed: 27,680 RPM
Over-tightening of the mounting screws may cause the fan casing to push into the fan blades and may damage the fans. This situation is not covered under the Motor Warranty Program and will not be approved if submitted. If motor is turned in under warranty and is found to have the type of damage explained above, the warranty will be denied. When mounting your new motor, in most cases a touch BEYOND “finger tight” is all that is required to mount and seat the motor sufficiently.