New Lamb Ametek 117507-00 motor is a 3-stage, 7.2 inch, 120 volt.
If your application requires sealed bearings you may use our part #MTR118.
DON’T RISK PREMATURE FAILURE FOR YOUR NEW MOTOR!
We HIGHLY recommend the maximum protection of your motor by using our exclusive Filtered Motor Gasket, part #MTR1500. Our Filtered Motor Gasket is the only one of its kind and only available from Central Vacuum Factory! It is specially designed by our engineers to provide your motor with years of trouble free service by filtering out dust and dirt BEFORE they reach your motor and damaging it! The filtered motor gasket fits flush and is as easy to apply as a regular gasket and will not add any height to your motor during mounting!
Uses motor brushes part MTR505.
If your application REQUIRES the 117507-13, this motor WILL WORK in its place, but a shorter life expectancy could be possible.
If your application REQUIRES that the 117507-13 be used, please see our part #MTR118.
- Motor Type: Bypass
- Discharge: Tangential
- Bearings: Double Ball Bearing
- Sealed Vacuum: 134.1 inches
- Maximum Air Watts: 406
- Maximum Air Flow: 94 CFM
- Maximum Amps: 12.7
- Motor Speed: 17,200 RPM
Over-tightening of the mounting screws may cause the fan casing to push into the fan blades and may damage the fans. This situation is not covered under the Motor Warranty Program and will not be approved if submitted. If motor is turned in under warranty and is found to have the type of damage explained above, the warranty will be denied. When mounting your new motor, in most cases a touch BEYOND “finger tight” is all that is required to mount and seat the motor sufficiently.