Description
Genuine OEM Lamb Ametek 116311-00 Vacuum Motor – 5.7″ 2-Stage, 120 Volt
The Lamb Ametek 116311-00 is a genuine OEM 5.7-inch, 2-stage, 120 volt thru-flow vacuum motor engineered for strong suction, reliable performance, and long service life. With its durable ball bearing and sleeve bearing combination, this motor is a trusted OEM replacement for commercial, industrial, and central vacuum applications requiring a compact and efficient 5.7″ motor.
Protect Your New Motor from Premature Failure with Our Recommended Filtered Motor Gasket:
Don’t risk shortening the life of your new motor! For maximum protection, we strongly recommend using our exclusive Filtered Motor Gasket (Part # MTR1500). This gasket filters out dust and debris before they reach the motor, preventing internal damage and extending motor life.
Our filtered gasket:
- Is exclusive to Central Vacuum Factory
- Fits flush with no added mounting height
- Installs as easily as a standard gasket
- Provides superior filtration and long-term protection
For a standard gasket option, see Part # MTR512.
Recommended Motor Filter
To further extend the life of your motor, use a protective motor filter. This prevents dust and dirt from entering the fan system and is highly recommended for all vacuum motors.
See our standard motor filter: Part # MTR553.
Replacement Motor Brushes
Uses carbon brush set:
MTR503
Motor Specifications:
- Motor Type: Thru-Flow
- Discharge: Peripheral
- Bearings: Ball Bearing / Sleeve
- Sealed Vacuum: 94.4 inches
- Maximum Air Watts: 245
- Maximum Air Flow: 98.6 CFM
- Maximum Amps: 8.3
- Motor Speed: 18,390 RPM
Common Uses for the 116311-00 Motor:
- Commercial canister vacuums
- Central vacuum systems
- Carpet extractors
- Wet/dry vacuums
- Industrial vacuum systems
- Auto detailing equipment
*We reserve the right to substitute a motor with a motor of equal or better performance. The substituted motor will be a manufacturer’s direct recommended replacement motor that is in factory new condition. The reason for substitution may be due to a discontinued motor or lack of production stock. We make every effort to provide you with the motor that you originally ordered. If you have any questions or concerns please contact us prior to placing your order.
Installation note:
Over-tightening of the mounting screws may cause the fan casing to push into the fan blades and may damage the fans. This situation is not covered under the Motor Warranty Program and will not be approved if submitted. If motor is turned in under warranty and is found to have the type of damage explained above, the warranty will be denied. When mounting your new motor, in most cases a touch BEYOND “finger tight” is all that is required to mount and seat the motor sufficiently.